AARYA COOL-CUT

PRODUCT DESCRIPTION: AARYA COOL-CUT is MULTI-PURPOSE SOLUBLE CUTTING OIL manufactured from carefully selected paraffinic base oils and proprietary emulsifiers which have a bearing on the stability of the emulsion even with water of 400 ppm hardness. A stable milky white emulsion is prepared by adding the oil to water with continuous stirring. AARYA COOL-CUT gives the desired cooling characteristics, provides rust protection, lubricity for the cutting operation with good finish of work piece and longer life for tools. AARYA COOL-CUT is also fortified with appropriate biocides to keep control of bacterial growth.

APPLICATION: AARYA COOL-CUT is recommended for variety of cutting operations in both ferrous and non-ferrous metals.  For general machining operations the emulsion is normally prepared with 5% oil and for grinding operation the emulsion has 2% of oil.

CAUTION: Not recommended for Machining for Magnesium as fine chips of magnesium is a fire hazard when moistened with water.

PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002)

Typical Properties
CHARACTERISTICS AARYA COOL-CUT
Water, % mass, Max 10.0
Copper strips corrosion at 1000C for 3 Hrs, Max. 1 (a)
Emulsion Stability Test, 5:1 and 20:1 ratio in water of 400 ppm hardness Passes
Thermal stability Test Passes
Ash, % by mass, Max. 3.5
Frothing Test, 5:1 and 20:1 ration in water of 200 ppm Passes
Flash Point, COC, 0C, Min. 150
Cast Iron corrosion test 0/1-1
Available Packing: 5 Ltr, 10 Ltr, 20 Ltr, 26 Ltr, 50 Ltr & 210 Ltr
These are typical figures and do not constitute specification. In pursuit of continuous improvement, these figures may be changed without notice at sole discretion of Aryan Lubricants Pvt. Ltd.